Reboot Linksys WAG160N / WAG54 / WAG320 / WAG120N Router / Gateway

by

To reboot a Linksys WAG160N, WAG54, WAG320, or WAG120N router or gateway, you can follow these steps:

  1. Open a web browser and enter the IP address of the router in the address bar. The default IP address is typically “192.168.1.1”.
  2. Enter the administrator username and password. The default username is “admin” and the default password is “admin”.
  3. Once you are logged in, navigate to the Administration or Management section of the router’s web interface.
  4. Locate the Reboot or Restart option and click on it.
  5. A confirmation window will appear, asking you to confirm that you want to reboot the router. Click on the “Reboot” or “Yes” button to proceed.
  6. The router will restart and take several minutes to fully boot up.
  7. Once the router is back online, you can reconnect to the network and check if the problem has been resolved.

Note: If you are unable to access the web interface, you can also try rebooting the router by unplugging the power cord and plugging it back in after a few seconds. This will also cause the router to restart. (https://www.topskitchen.com)

Leave a Comment