To rename a Linux RAID array from md0
to md2
, you can follow these steps:
- Stop the RAID array:
sudo mdadm --stop /dev/md0
- Create a new RAID array with the desired name:
sudo mdadm --create /dev/md2 --level=<RAID_level> --raid-devices=<number_of_devices> <devices>
Replace <RAID_level>
with the RAID level (e.g., 0
, 1
, 5
, 6
, etc.), <number_of_devices>
with the number of devices in the array, and <devices>
with the devices that make up the array (e.g., /dev/sda1 /dev/sdb1
).
- Copy the data from the old array to the new array:
sudo dd if=/dev/md0 of=/dev/md2 bs=<block_size>
Replace <block_size>
with the desired block size.
- Remove the old RAID array:
sudo mdadm --remove /dev/md0
- Update the
/etc/mdadm.conf
file to reflect the change:
sudo sed -i 's/md0/md2/g' /etc/mdadm.conf
- Start the new RAID array:
sudo mdadm --assemble /dev/md2
Note that these steps assume that the RAID array uses the standard Linux software RAID implementation. If you’re using a different RAID implementation, the steps may be different. Additionally, it’s important to backup your data before making any changes to a RAID array to ensure that you can recover your data in case something goes wrong. (www.contentbeta.com)