Skip to content
TrySitePrice

How to write FreeBSD image to USB disk for installation using dd command

Best/Tutorial

Here are the general steps to write a FreeBSD image to a USB disk using the dd command:

  1. Insert the USB drive into your computer
  2. Determine the device name of the USB drive by running the command lsblk. The device name will be something like /dev/da0 or /dev/sdb. Be very careful to select the correct device name, as using the wrong device name can result in data loss.
  3. Unmount the USB drive if it is already mounted: umount /dev/da0
  4. Use the dd command to write the image to the USB drive. The basic syntax for the command is: dd if=path/to/image.img of=/dev/da0 bs=1M
  5. Wait for the command to complete. This may take some time depending on the size of the image and the speed of your USB drive
  6. Once the command is completed, You can now remove the USB drive and use it to install the operating system on your target machine
rnNote: The above instructions assume you have already downloaded the image and have the path to the image.img file. Also, be sure to use the correct device name for your USB drive.