How To Install pfSense Firewall On a Hard Disk Drive With Serial Console Support On the Soekris net5501 Router

by

Here are the steps to install pfSense firewall on a hard disk drive with serial console support on the Soekris net5501 router:

  1. Download the pfSense ISO file from the official website.
  2. Burn the ISO file to a CD.
  3. Connect the Soekris router to a computer with a serial cable.
  4. Configure the serial terminal software on the computer with the following settings:
    • Baud rate: 115200
    • Data bits: 8
    • Stop bits: 1
    • Parity: None
    • Flow control: None
  5. Insert the CD into the Soekris router and power on the router.
  6. Connect to the Soekris router using the serial terminal software.
  7. Press Enter when prompted to start the pfSense installation process.
  8. Select “Install” from the menu to install pfSense to the hard disk drive.
  9. Follow the on-screen instructions to complete the installation process, including partitioning the hard disk drive, setting up the network interface, and configuring the firewall.
  10. After the installation process is complete, remove the CD and reboot the Soekris router.
  11. Connect to the pfSense firewall via the web interface or the serial console to complete the initial configuration.

Note: The exact steps may vary slightly depending on the version of pfSense and the Soekris router used. It is recommended to consult the pfSense documentation and the Soekris website for more information. (https://swagatgrocery.com/)

Leave a Comment