How To Install FreeBSD on Raspberry Pi 2 Model B

by

To install FreeBSD on a Raspberry Pi 2 Model B, you can follow these steps:

  1. Download the FreeBSD image for Raspberry Pi 2 Model B from the official FreeBSD website.
  2. Write the image to a MicroSD card using a tool like Etcher.
  3. Insert the MicroSD card into the Raspberry Pi 2 Model B, connect a keyboard, mouse, and monitor to it, and power it on.
  4. At the boot prompt, select the option to boot from the MicroSD card.
  5. Once the system has booted, log in as the root user. The default root password is root.
  6. Run the following command to start the system configuration utility:
sysinstall
  1. In the system configuration utility, select the option to configure the network, and configure the network settings for your Raspberry Pi.
  2. Select the option to install the system, and follow the on-screen instructions to complete the installation.
  3. Once the installation is complete, reboot the system.
  4. Log in as the root user, and use the pkg command to install any additional software packages you need.

Note that the installation process may take some time, depending on the speed of your MicroSD card and the internet connection. Also, the Raspberry Pi 2 Model B has limited resources, so some tasks may be slow or may not work as expected. However, you should be able to use FreeBSD on the Raspberry Pi 2 Model B for basic tasks and experimentation.

Leave a Comment